• <menu id="c26e4"></menu>
  • <samp id="c26e4"><label id="c26e4"></label></samp>
  • IZE学院 订单查询

    0086-21-31006702 联系我们 关于我们 账号注册及登录
    您当前的位置: 首页 >> 产品中心 >> 分析仪器-实验设备-医疗器械 >> 仪器仪表 >> 仪器仪表 >> TREK充电板监测器156A

    TREK充电板监测器156A

    请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
    产品品牌:
    型号:
    TREK监测器156A
    预估货期:
    关  键  词:TREK监测器158A 156A
    相似产品:
    是否有问题?联系我们工作人员
      邮件联系

    TREK监测器156A规格:

    Performance


    Monitored Voltage Range

    0 to ±1100 V DC or peak AC

    Large Signal Bandwidth

    DC to 10 Hz (measured at 2000 V p-p)

    Small Signal Bandwidth (-3dB)

    DC to 1 kHz (measured at 20 V p-p)

    Plate Self-Discharge Rate

    Less than 12 V/minute

    Voltage Monitor


    Output   

    BNC provides low voltage replica of plate

    Scale Factor  

    1/200th of the plate voltage

    DC Accuracy   

    Better than 0.1% of full-scale

    Better than 0.1% of full-scale


    Mechanical


    H x W x D

    83 x 318 x 280 mm (3.25 x 12.5 x 11 in)

    Weight

    2 kg (4.4 lb)

    Operating Conditions


    Temperature

    5 to 35°C (41 to 95°F)

    Relative Humidity

    To 80%, non-condensing

    Altitude

    To 2000 m (6561.68 ft)

    Typical Applications


    ESD monitoring of sensitive manufacturing processes such as semiconductor, disk drive, and LCD

    Testing of all types of ionizers, including room ionization systems, AC and DC blowers, nuclear ionizers, gun-type ionizers, and pulsed DC ionizers

    High-temperature applications

    ESD measurement of de-ionized water

    Dissipative testing applications

    爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

    TREK监测器156A产品介绍:

    Charge Plate Monitor for Evaluating the Performance of Air Ionizers Used to Neutralize Static Charges

    Advanced Energy’s Trek 156A tests the efficiency of an ionizer’s ion production by timing how long it takes air ions produced to discharge a floating plate that has been pre-charged to either a positive or negative value.

     

    Monitored Voltage Range: 0 to ±1100 VDC or peak AC

    Large Signal Bandwidth: (-3dB): DC to 10 Hz

    Decay Mode Thresholds: Programmable from 1 to ±1000 V in 1V increments (accurate within ±1V of programmed voltage)

     

    Overview

    The Trek? 156A tests the efficiency of an ionizer’s ion production by timing how long it takes air ions produced to discharge a floating plate that has been pre-charged to either a positive or negative value. The Trek 156A also tests the balance between positive and negative air ions by measuring the offset voltage generated on a floating plate due to an imbalance of positive and negative air ions impinging on the plate from the ionizer.

     

    Typically, as an ionizer ages, the rates of positive and negative air ion production decline. Consequently, the time required for the ionizer to neutralize static charges increases, and the balance of positive and negative air ions changes. The neutralization (decay) time may become too long for the ionizer to fully neutralize charges that are generated at a work location, or the ionizer may begin to charge objects that were initially uncharged.

     

    Benefits

    Set custom measurement capacitance for assurance that ESD process needs are met in manufacturing

    Easily transport within a facility with the compact and lightweight design

    Use for ESD monitoring of sensitive manufacturing processes such as semiconductor, disk drive, and LC

     

    Features

    Extremely low offset and drift ensures high accuracy, making it ideal for applications requiring critical ion balance such as GMR and TMR manufacturing areas

    NIST-traceable Certificate of Calibration provided with each unit

     

    充电板监视器,用于评估用于中和静电荷的空气电离器的性能

    Advanced Energy的Trek 156A通过计时产生的空气离子排空已预充电为正值或负值的浮板所需的时间,来测试电离器产生离子的效率。

     

    监控电压范围:0至±1100 VDC或峰值AC

    大信号带宽:(-3dB):直流至10 Hz

    衰减模式阈值:可在1至±1000 V范围内以1V的增量进行编程(准确在编程电压的±1V之内)

     

    总览

    Trek 156A通过计时产生的空气离子排空已预充电为正值或负值的浮板所花费的时间,来测试电离器产生离子的效率。 Trek 156A还通过测量由于来自离子发生器的正负空气离子的不平衡而在浮板上产生的补偿电压,来测试正负空气离子之间的平衡。

     

    通常,随着离子发生器的老化,空气中正离子和负离子的产生速率会下降。因此,电离器中和静电荷所需的时间增加,正负空气离子的平衡发生变化。中和(衰减)时间可能变得太长,以致于离子发生器无法完全中和在工作场所产生的电荷,或者离子发生器可能开始对最初不带电的物体充电。

     

    好处

    设置定制的测量电容,以确保在制造过程中满足ESD工艺要求

    紧凑轻巧的设计可在工厂内轻松运输

    用于敏感制造过程(如半导体,磁盘驱动器和LC)的ESD监视

     

    特征

    极低的失调和漂移确保了高精度,非常适合需要关键离子平衡的应用,例如GMR和TMR制造领域

    每个单元随附NIST可追溯的校准证书

     

    TREK监测器其他型号:

    TREK Monroe 282 Series

    TREK Monroe 287B

    TREK Monroe 288B

    TREK Trek 156A

    TREK Trek 158A

    TREK Trek PD04002A

     

    TREK Monitor NEW + ORIGINAL+ ONE YEAR WARRANTY

     

    爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

     

    如果有任何关于TREK监测器156A的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

     

    If you have any question for TREK products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ehcontrols.com.


    TREK监测器156A规格描述

    免责声明:本网站的布局,设计和编辑版权归?上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。
    快3网