• <menu id="c26e4"></menu>
  • <samp id="c26e4"><label id="c26e4"></label></samp>
  • IZE学院 订单查询

    0086-21-31006702 联系我们 关于我们 账号注册及登录
    您当前的位置: 首页 >> 产品中心 >> 工业热能-燃烧控制 >> 火检设备 >> 火检设备 >> ABB火检光纤SF810系列

    ABB火检光纤SF810系列

    请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
    产品品牌:
    型号:SF810INT-LOS-UV
    ABB火焰检测器SF810INT-LOS-UV
    预估货期:
    关  键  词:ABB火焰检测器SF810INT-LOS-UVSF810-FOC-IR
    相似产品:
    是否有问题?联系我们工作人员
      邮件联系

    ABB 火焰检测器SF810系列规格描述

    Technical specifications

    Property

    Value

    Optical sensor Technology

    IR versions: Si photodiode Spectral response peak @ 920nm
    IR versions: Si photodiode Spectral response peak @ 920nm
    VL versions: Si photodiode Spectral response peak @ 560nm
    UV versions: SiC photodiode Spectral response peak @ 280nm
    UVIR version: Si + SiC photodiode1 Spectral response peak @280nm and 920nm
    1 Si and SiC photodiodes signals can be processed individually or both combined as per burner opertion

    Power supply voltage

    24VDC (-25%, +20% = 18 ÷ 29VDC )

    Power supply current

    150mA typical,

    Power consumption

    3.6W typical, 4W max

    Inrush current

    6A peak, 2ms settling time

    Flame Relay
    Safe Relay

    Contacts: 1 NO, for each relay
    240 VAC / 1.5A   cycles ≥ 100,000
    240 VDC / 100 mA
     30 VDC / 300mA
    Minimum load 10mA, 5VDC

    FFRT

    Flame Failure Response Time: 0.2s to 4s

    Analog output (4-20mA)

    4÷20 mA (R load <= 500Ω)
    Galvanically isolated
    Precision: +/-5% f.s

    Digital Inputs, 24 VDC

    Nr. 2 digital inputs (opto coupled), to allow selection of one out of four different sets of parameters; return signal common to both inputs.
    Nominal voltage 24VDC (5 mA typical)
    Max Voltage 36 VDC
    Off: < 5 VDC
    On: > 18 Vdc

    Communication ports

    Two, redundant, RS-485 serial channels configurable in Profibus or Modbus protocols.
    Profibus: max speed 12 Mbit/s
    Modbus: max speed 115.200 bit/s

    Local configuration interface

    4 push buttons (UP, DOWN , LEFT, RIGHT)
    3-digits LED display

    Air source for lens cleaning

    From clean ambient air

    Air flow for lens cleaning

    LOS (Line Of Sight) versions: 115 l/min (4 SCFM)
    Excessive contaminants might require a flow up to 400 l/min (14 SCFM)
    FOC (Fibre Optic Cable) versions: 400 l/min (14 SCFM)

    Minimum cleaning air pressure

    LOS (Line Of Sight) versions: 20mm H2O (1” W.C.) above the max wind box pressure measured at the “Y” connection inlet.
     FOC (Fiber Optic Cable) versions: 400mm H2O (12” W.C.) above the max wind box pressure measured at the “Y” connection inlet.

    Maximum fibre optic continuous
    operating temperature

    482° C (900° F) for VL and IR fiber optic cables
    350° C (662° F) for UV and dual sensor UVIR fiber optic cable

    Housing mounting thread

    1” NPT male

    Cable entry thread

    ? “ NPT female (N/A for connectorized versions)

    Electrical connections
    (terminal versions)

    Removable terminals with screws
    Allowable cable section:
    AWG24-AWG12, 0.2-2.5mm2 for Relay contacts (J1 connector)
    AWG 28-AWG16, 0,08-1.5mm2 for all other terminals

    爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

    ABB火焰检测器SF810系列介绍

    SF810是一种多燃料扫描仪,旨在为公用事业和工业锅炉燃烧器提供稳定可靠的火焰一致性和火焰质量信息。

     

    应用:

    公共和工业锅炉

    ?壁挂式,转角式,下抛和旋风燃烧器类型

     

    多燃料

    ?天然气,焦炉气,硫气

    ?轻质和重质燃油,奥里油

    ?煤粉

     

    特征:

    ?UV,VL,IR固态传感器

    ?双传感器UVIR

    ?连续自检

    ?F-FFRT快速火焰故障响应时间

    ?用于远程设置的数字输入(隔离)

    ?自动调谐

     

    ABB火焰检测器SF810系列其他常用型号:

    ABB SF810-FOC-IR-Q-C-W

    ABB SF810-FOC-IR-Q

    ABB SF810-FOC-IR-T-C-W

    ABB SF810-FOC-IR-T

    ABB SF810INT-LOS-UV-Q-C-W

    ABB SF810INT-LOS-UV-Q

    ABB SF810-LOS-UV-Q-C-W

    ABB SF810-LOS-UV-Q

    ABB SF810-LOS-UV-T-C-W

    ABB SF810-LOS-UV-T

    ABB SF810-LOS-UV-T-W

    ABB SF810-FOG-IR-TL

    ABB SF810INT-LOS-UVIR

    ABB SF810INT-LOS-UV

     

    ABB Flame detector NEW + ORIGINAL+ ONE YEAR WARRANTY

     

    爱泽工业集产品开发、设计、制造、销售、于一体,代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

     

    如果有任何关于ABB火焰检测器SF810INT-LOS-UV的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

     

    If you have any question for ABB products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ehcontrols.com.


    ABB火焰检测器SF810系列SF810INT-LOS-UV规格及型号描述

    免责声明:本网站的布局,设计和编辑版权归?上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。
    快3网